Connecting To A Wired Network - Hitachi L32VG08U Instructions For Use Manual

Connecting to a Wired Network

For connecting to a wired LAN network, you should perform the following steps:
• Connect broadband ISP connection ethernet cable to the ETHERNET INPUT of your modem.
• Ensure that Nero Media Home software is installed to your PC.(for DLNA function)
• Afterwards, you should connect your PC to the one of your modem's LAN connectors (e.g. LAN 1) by using
a proper LAN cable.
• Use another LAN output of your modem (e.g. LAN 2) to enable the connection to your TV. You can add
your TV to your LAN by connecting the LAN port at the rear of your TV to your modem's LAN connector as
illustrated below.
• You might be able to connect your TV to your LAN network depending on your network's confi guration. In
such a case, use an ethernet cable to connect your TV directly to the network wall outlet.
Broadband ISP
Connection
PC with Nero
Media Home
software installed
Lan(Ethernet cable)
Rear of TV
English - 12 -
Rear of TV
The modem port
on the wall