Table of Contents
Advertisement
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power cord to the system. Press Power
On/Off switch. Then the TV switches itself to
stand-by mode (optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the "-P/CH"
or "P/CH+" button on the TV or press the P+ or P-
button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
• Press the "
(stand-by)" button on the remote con-
trol or On/Off switch on the TV, so the TV will switch
to stand-by mode.
To power down the TV completely, press On/Off
switch
or,
Unplug the power cord from the mains socket.
Navigating the Menu System
For Displaying
MENU
Menu Options
+
1- Press
to display the menu.
2- Press
/
button to select an icon.
3- Use
/
button to highlight. Press
options in analogue TV mode. Use OK in DTV mode
for viewing a submenu.
4- Press
/
buttons to change the settings. Press
OK to set as default.
5- To exit the menu or return from sub-menu screen,
press
.
These explanations are available for the navigation
of the whole menu system. To select options that are
explained in the following parts, refer to "Navigating
The Menu System".
GUIDE
For Navigation
OK
RETURN
To Confirm Choices
for more
Initial Settings
When the TV is turned on for the first time, it is in the
digital mode.
Because this is the first time the TV is used, there are
no channels stored in the memory and the following
message appears on the screen.
Please ensure aerial is plugged in.
Do you want to start first time installation?
• To start installation process, select Yes, to cancel
select No.
• To select an option Yes or No, highlight the item by
using
/
buttons and press the OK button.
The IDTV will automatically tune to the UHF transmision
channels 21 to 68 looking for digital terrestrial TV broad-
casts and displaying the names of channels found.
This process will take about five minutes. To cancel
searching, you can press the
during the process.
AUTOMATIC SEARCH
Channels:
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
12 %
Cancel searching
MENU
After Automatic Search process is completed, the
following message asking for analogue channel search
appears on the screen. TV switches to the analogue
TV mode.
Do you want to search for
analogue channels?
Yes
To seach for analogue channels, select Yes. The
menu below is displayed to search for analogue chan-
nels.
- 10 -
Yes
No
button at any time
No
Advertisement
Table of Contents
