Hitachi SJ300 Series Quick Reference Manual page 28

Func.
Code
B043 Torque limit (3) (reverse-driving in
4-quadrant mode)
B044 Torque limit (4) (forward-regenerating in
4-quadrant mode)
B045 Torque limit LADSTOP enable
• 00 Disable
B046 Reverse Run protection enable
• 00 Disable
B050 Controlled deceleration and stop on power loss
• 00 Disable
B051 DC bus voltage trigger level during power loss
B052 Over-voltage threshold during power loss
B053 Deceleration time setting during power loss
B054 Initial output frequency decrease during power
loss
B080 [AM] terminal analog meter adjustment
B081 [FM] terminal analog meter adjustment
B082 Start frequency adjustment
B083 Carrier frequency setting
B084 Initialization mode (parameters or trip history)
• 00 Trip history clear
• 01 Parameter initialization
• 02 Trip history clear and parameter initializa-
tion
B085 Country code for initialization
• 00 Japan version
• 02 US version
B086 Frequency scaling conversion factor
B087 STOP key enable
• 00 Enable
B088 Restart mode after FRS
• 00 Restart from 0Hz
• 01 Restart from frequency detected from
actual speed of motor
B090 Dynamic braking usage ratio
B091 Stop mode selection
B092 Cooling fan control
• 00 Fan always ON
• 01 Fan ON during Run, OFF during Stop
Name / Description
• 01 Enable
• 01 Enable
• 01 Enable
• 01 Europe version
• 03 (reserved)
• 01 Disable
26
Default
Set
Value
Value
–FE/FU/FR
150.
150.
00
00
00
0.0
0.0
1.00
0.00
180
60
0.50
5.0
00
01 / 02 / 00
1.0
00
00
00
00
00