Set Pin; Time Settings; Audio Description; Preferred Language - Hitachi 42LDF30U Instructions For Use Manual

will be updated after exiting 'Configuration
Menu'.

Set PIN

Use " " or " " buttons to go to "Set PIN" option.
Press OK to display the "Set PIN" window. Use
numeric buttons to enter new pin number you
will need to input your new pin a second time
for verifi cation purposes. If both pin numbers
are four digits long and the same, the pin will
be changed. The factory default pin number is
0000, if you change the pin number make sure
you write it down and keep it safe.

Time Settings

In the configuration menu, highlight the Time
Settings item by pressing " " or " " buttons.
Press OK and Time Settings sub menu will be
displayed on the screen. Current Time,Time
Zone Setting and Time Zone will be available.
Use " " or " " buttons to highlight the Time
Zone
Setting. Time Zone Setting is set using " " or "
" buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Current Time and
Time
Zone options will not be available to be set. If
MANUAL option is selected as the Time Zone
Setting, Time Zone can be altered:
• By pressing " " or " " buttons select Time
Zone.
Use " " or " " buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time
on the top of the menu list will then change
according to the selected Time Zone.

Audio Description

Audio description refers to an additional
narration track for blind and visually impaired
viewers of visual media, including television and
movies. The description narrator talks through
the presentation, describing what is happening
on the screen during the natural pauses in
the audio (and sometimes during dialogue, if
deemed necessary). You can use this feature,
only if the broadcaster supports that additional
narration track. Use " " or " " buttons to select
an item. Then use " " or " " buttons to set.
Audio Description
This function enables or disables the audio
description feature by pressing the " " or "
" buttons.

Preferred Language

By pressing the " " or " " buttons the preferred
audio description language is being changed.
This setting can be used, only if it is available.

Relative Volume

Using this option, the Audio Description volume
level can be increased or decrased relatively,
according to the general volume.

Standby Search (*)

(*) This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or
Finland.
Use " " or " " button to select Standby Search
and then press " " or " " button to set this
setting as On or Off. If you change Standby
Search to Off, this function will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.

Language

In this menu the user can adjust the preferred
language. Language is changed by pressing
OK button.
English - 27 -