Pioneer DEH-P300 Service Manual page 76

DEH-P300,P3000,P200
Basic Operation of Built-in CD Player
Switching the Display
Each press of the DISPLAY button changes
the display in the following order:
Playback mode (Elapsed play time)
= Disc Title
Note:
• If you switch displays when disc titles have
not been input, "NO TITLE" is displayed.
Track Search and Fast Forward/Reverse
• You can select between Track Search or Fast forward/Reverse by pressing
the 2/3 button for a different length of time.
Track Search
Fast forward/Reverse
Note:
• If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Push the
EJECT button and check the disc for damage before reinserting it.
• If a CD is inserted with the recorded side up, it will be ejected automatically after a few moments.
• If the built-in CD player cannot operate properly, an error message (such as "ERROR-14") appears
on the display.
76
Disc Loading Slot
The built-in CD player plays one standard 12 cm or 8 cm (single)
CD at a time. Do not use an adapter when playing 8 cm CD.
Track Number Indicator
Eject
Note:
• The CD function can be turned
ON/OFF with the disc remaining in
this product.
• Discs left partially inserted after ejec-
tion may incur damage or fall out.
Elapsed Play Time Indicator
0.5 seconds or less
Continue pressing