Table of Contents
Advertisement
InSpECTIOn, MAInTEnAnCE,
And CLEAnInG
1.
BEFORE EACH USE:
general condition of the Worklight.
Check for loose screws, misalignment
or binding of moving parts, cracked or
broken parts and any other condition
that may affect its safe operation.
2.
BATTERY PACK REPLACEMENT:
This Battery Pack is nOT replace-
able.
3.
CIGARETTE LIGHTER ADAPTER
FUSE REPLACEMENT:
A faulty Cigarette Lighter Adapter
typically indicates a blown Fuse. To
replace the Fuse, unscrew and re-
move the Outer Fuse Cap. Remove
the Inner Fuse Cap and Spring.
Replace the old Fuse with a new
F3AL250V Fuse. Then re-install the
Spring, Fuse, Inner Fuse Cap, and
Outer Fuse Cap. (See Figure B.)
FuSE
(TYpE: F3AL250V)
OuTER FuSE CAp
InnER FuSE CAp
SpRInG
4.
AFTER USE: clean all external
surfaces of the Worklight with a soft,
clean cloth. Do not use solvents. Do
not immerse the Worklight in liquid.
5.
WARnInG! If the Cord of the
AC/dC Adapter (17) or Cigarette
Lighter Adapter (16) are damaged,
they must be replaced only by a
qualified service technician.
SKU 98113
For technical questions, please call 1-800-444-3353.
Inspect the
FIGuRE B
CIGARETTE LIGHTER
AdApTER
(16)
pLEASE REAd THE
FOLLOWInG CAREFuLLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION
OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR
SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND
PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND
NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT
PARTS THERETO.
Page 9
Advertisement
Table of Contents
