Mitsubishi Electric 3D DLP 642 Series Owner's Manual page 12

12
2. TV Menus
Picture, continued
Picture Adv anced
1. Press MENU. Under Picture, highlight the
Advanced icon and press ENTER.
2. With Picture Mode (the first option) highlighted,
press ENTER to change from blank (undefined) to
ADV1 (daytime settings) or ADV2 (nighttime settings).
3. Use to highlight an option you wish to change and
press ENTER to see the adjustment display.
4. Press to change settings.
5. Use to navigate to additional options and press
to change settings.
6. Press MENU to return to the Picture > Advanced
menu and save the adjustments for the current
input. Press EXIT to close the menu.
Saving Custom 3D Settings
This menu can be used to create a custom Picture
Mode for viewing 3D content. Mitsubishi recommends
using ADV1 to save 3D settings and ADV2 to save 2D
settings.
To create a custom 3D picture mode:
• The TV must be receiving a 3D signal
• One of the TV's 3D Source Formats must be
selected
• You must be wearing matching 3D glasses.
For assistance call 1(800) 332-2119
(642 Series only)
Picture > Advanced allows you to save highly customized picture adjustments for each
input. Mitsubishi recommends these adjustments be made only by a trained pro-
fessional installer.
To Use a Custom Picture Mode at a Later Time
• Press VIDEO and use
option. Press to select ADV1 or ADV2.
• Press MENU and go to Picture > Video > Picture
Mode and select ADV1 or ADV2.
To Return to the Default Values for Advanced
Display the Picture > Advanced menu and:
1. Highlight the name of the Advanced mode to change.
2. Highlight RESET Pic Mode and press ENTER. You
must perform the reset separately for both ADV1
and ADV2.
to find the Picture Mode