Oven Cooking - Maytag Coil Electric Range User Manual

Coil electric range
Table of Contents

Advertisement

Available languages

Available languages

Oven Cooking

Manual Clean Oven Control
(select models)
NOTE: The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil
indicators light when function is pressed.
A
Bake
Use for baking and roasting.
B
Broil
Use for broiling and top browning.
C
Timer
Sets timer.
D
Clock
Use to set time-of-day clock.
E
CANCEL
Cancels all operations except timer
and clock.
▲ or ▼
F
Enters or changes time, oven
temperature. Sets HI or LO broil.
Using the Touchpads
• Press the desired pad.
• Press the ▲ or ▼ pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the ▲ or ▼ pad.
• A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the ▲ or ▼ pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the ▲ or ▼ pad, the function will be canceled and the
display will return to the previous display.
Setting the Clock
1. Press the Clock pad.
• The clock time cannot be set if the control is pro-
grammed for a bake, broil or timing operation.
A
B
C
D
E
2. Set the correct time of day using the ▲ or ▼ pads. If the
▲ or ▼ pad is not pressed within 30 seconds, the program
will cancel. Press the Clock pad and begin again.
Setting the Timer
The timer can be set from one minute (:01) up to 99 hours
and 59 minutes (99:59). Time will be displayed in minutes and
not in seconds. THE TIMER DOES NOT CONTROL THE
OVEN.
1. Press the Timer pad.
• 0:00 will light and the colon (:) will flash in
the display.
2. Press the ▲ or ▼ pad until the desired time is
displayed.
• The timer will begin as soon as the time is set.
• The flashing colon indicates that a timing
operation is in progress. (The colon will not
flash if the time of day or oven temperature is
displayed.)
• Two short beeps signal the end of the operation. "0:00"
will appear in the display.
• If desired, press the Clock pad and the time of day will
briefly reappear in the display during a timing operation.
• If desired, press the Bake or Broil pads and the current
temperature setting will briefly reappear in the display
during a timing operation.
To cancel the timer operation:
Press and hold the Timer pad for several seconds.
7
F

Advertisement

Chapters

Table of Contents
loading

Table of Contents