To remove:
1. Pull rack straight out until it
stops at the lock-stop position.
2. Lift up on the front of the rack
and pull out.
To replace:
1. Place rack on the rack supports in the oven.
2. Tilt the front end up slightly. Slide rack back until it clears
the lock-stop position.
3. Lower front and slide back into the oven.
Never cover an entire rack with aluminum foil or place
foil on the oven bottom. Baking results will be affected
and damage may occur to the oven bottom.
Rack Positions
RACK 5: Used for toasting
bread or broiling thin, non-
fatty foods.
RACK 4: Used for most
broiling.
RACK 3: Used for most
baked goods on a cookie
sheet or jelly roll pan, layer
cakes, or frozen convenience foods and general single-rack
baking.
RACK 2: Used for pound cakes, Bundt cakes, pies, casseroles
and roasting small cuts of meat.
RACK 1: Used for pound cakes, 9 x 13 cakes, pies and
roasting large cuts of meat and poultry.
MULTIPLE RACK COOKING:
Two rack: Use rack positions 2 and 5, or 1 and 4.
Important: Never place pans directly on the oven bottom.
Baking Layer Cakes on Two Racks
For best results when
baking cakes on two
racks, use racks 2
and 5.
Place the cakes on
the rack as shown.
Page 20