Install Menu; Program Table; Name; Insert - Hitachi 32LD8D20UC Instructions For Use Manual

Install Menu

INSTALL

Program Table

Program

Band
Channel
Colour System
Program Table
By pressing / button, select Program Table.
Press to display Program Table.
Program Table
P01 BBC 1
P02 C 04
P03 C 05
P04 BBC 1
P05 CH 4
P06 BBC 2
P07 C 04
P08 C 07
P09 C 12
P10 C 15
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except the AV
mode). By cursor action, programme selection is done
automatically.

Name

To change the name of a decided programme, select
the programme and press the RED button.
The first letter of the selected name will be highlighted.
Press / button to change that letter and
button to select the other letters. By pressing the RED
button, you can store the name.

Insert

Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By navi-
P11 S 18
P12 S 29
P13 S 31
P14 S 33
P15 S 34
P16 S 35
P17 S 36
P18 S 37
P19 S 40
P20 C 21
Name Insert
APS

Delete

/
GB - 22 -
gation buttons move the selected programme to the
decided programme space and press the GREEN but-
ton again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the se-
lected programme from the programme list, and the
programmes below shift one up.

APS (Auto Programming System)

When you press the BLUE button for APS, Auto Pro-
gramming System Menu will appear on the Screen.
Auto Program
Country
WARNING!
All Prestored Programs
will be deleted
UK

A.P.S. (Auto Programming System) Country

Press / button to select your country. If you want
to exit from A.P.S. function, press the "BLUE" button.
When you press OK or RED button for starting APS,
all stored programs will be erased and the following
screen will be displayed:
APS is running...
UK
P 03 - C 04
Whenever you press the "BLUE" button, A.P.S. func-
tion stops and Program Table appears on the screen.
If you wait until the end of A.P.S., Program Table is
displayed with the programmes found and located.
Program
By pressing / button, select Program. Press
/ button to select the program number. You can also
Ok
Cancel
63.75 MHz
6%
63.75 MHz
Cancel