Signal Ratings - Hitachi L300P Series Instruction Manual

1–10
L300P Inverter Specifications
Item
Protective functions
Environ- Temperature *10
ment
Humidity
Vibration *7
Location *8
Coating color
Accessories Digital input PCB
Others
Operator input devices *9

Signal Ratings

Signal / Contact
Built-in power for inputs
Intelligent (programmable) logic inputs
Intelligent (programmable) logic outputs Relay type, normally open contacts (1 Form A)
Thermistor input
PWM output
Voltage analog output
Current analog output
Analog input, current
Analog input, voltage
+10V analog reference
Alarm relay, normally closed contacts
Alarm relay, normally open contacts
Over-current, overload, braking resistor overload, over-voltage, EEPROM error, under-
voltage error, CT (current transformer) error, CPU error, external trip, USP error,
ground fault, input over-voltage, instantaneous power failure, inverter thermal trip,
phase failure detection, IGBT error, thermistor error, expansion card 1 error, expansion
card 2 error, under-voltage waiting error
Operating (ambient): -10 to 40°C / Storage: -20 to 65°C
20 to 90% humidity (non-condensing)
Models L300P–110xxx to 300xxx: 5.9 m/s
Models L300P–370xx to 1320xxx: 2.94 m/s
Altitude 1,000 m or less, indoors (no corrosive gasses or dust)
Models L300P–110xxx to 750xxx: Blue (D.I C14 version No. 436)
Models L300P–900xx to 1320xxx: Gray (MUNSELL 8.5YR6.2/0.2)
SJ-DG (4-digit BCD / 16-bit binary)
EMI filters, input/output reactors, DC reactors, radio noise filters, braking resistors,
braking units, LCR filter, communication cables, factory I/O network interface cards
OPE–SRE (4-digit LED with potentiometer) / OPE–S (4-digit LED w/o potentiometer),
Optional: OPE-SR (4-digit LED with potentiometer, Japanese/English overlay),
SRW–0EX Multilingual operator with copy function (English, French, German, Italian,
Spanish, and Portuguese)
Detailed ratings are in "Specifications of Control and Logic Connections" on page
24VDC supply, 100 mA maximum
27VDC maximum, 4.7kΩ input impedance
250 VAC / 30 VDC, 5A (resistive load) maximum
250 VAC / 30 VDC, 1A (inductive load) maximum
Minimum 5 VDC, 1mA
Minimum thermistor power 100mW
0 to 10VDC, 1.2 mA max., 50% duty cycle
0 to 10VDC, 2 mA max.
4-20 mA, nominal load impedance 250Ω
4 to 19.6 mA range, 20 mA nominal
0 to 9.6 VDC range, 10VDC nominal, 12VDC max., input impedance 10 kΩ
10VDC nominal, 10 mA maximum
Maximum loads: 250VAC, 2A; 30VDC, 8A resistive load
250VAC, 0.2A; 30VDC, 0.6A inductive load
Minimum loads: 100 VAC, 10mA; 5VDC, 100mA
250VAC, 1A; 30VDC 1A max. resistive load /
250VAC, 0.2A; 30VDC, 0.2A max. inductive load
Min. loads: 100 VAC, 10mA; 5VDC, 100mA
General Specifications
2
(0.6G), 10 to 55 Hz
2
(0.3G), 10 to 55 Hz
Ratings
4–8.