Tv Setup; Setup; Confi Guration; Ac3 Audio (**For Eu Countries Only) - Hitachi 32LD30U Instructions For Use Manual

• When no module is inserted, "No Common
Interface module detected" message appears
on the screen.
• Refer to the module instruction manual for
details of the settings.

TV Setup

You can use this item to display the TV
functions.
The digital TV Setup menu screen is accessed
from the main menu. Press the "M" button to
display the main menu and use " " or " " button
to highlight "TV Setup", press the OK button to
display TV Setup menu screen.
You can fi nd detailed information for all menu
items in "Analogue TV Menu System" section.

Setup

The adjustments in this menu are given as the
following:
Confi guration
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK
to view this menu. Press the EXIT button on the
remote control to exit.

AC3 Audio (**for EU countries only)

In the Confi guration Menu, highlight the AC3
Audio item by pressing " " or " " buttons. Use
the " " or " " buttons to set the AC3 Audio as
On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.

Hard of Hearing (**for EU countries only)

Use " " or " " button to select Hard of Hearing
and then press " " or " " button to set this
setting as On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.

Favourite Mode

This function enables or disables the 5 favourite
channel list mode by pressing " " or " " buttons
and OK. If a favourites list exists, it will switch to
the list number selected. If there is no favourite
listing, a warning message will be displayed.

Channel List

Use " " or " " buttons to go to Channel List
option. Use " " or " " buttons to toggle Channel
List Mode. If you select "TV Only", with the "
" or " " buttons, you navigate through only TV
channels. If you select "Radio Only", with the "
" or " " buttons, you navigate through only
radio channels. If you select "Text Only", with
the " " or " " buttons, you navigate through
only text channels. If you choose "Show All" all,
channels can be navigated with the " " or " "
buttons. To save the recent changes and exit;
press the "M" button.

Receiver Upgrade

Over Air Download (OAD)

To ensure that your TV always has the most
update information, use this setting. Please
ensure that the TV is set to standby mode. The
English - 25 -