Tuner
To access the Tuner mode:
•
Press FUNCTION repeatedly until Tuner
mode is selected.
•
The TUNER icon lights on the display when
tuner mode is selected.
To change tuner band:
•
Press BAND in tuner mode to
switch between FM and MW band.
To perform a station search:
•
Press
or
to adjust the frequency.
Use this method to tune to weak or distant
stations that are not strong enough to be
recognized by the automatic searching.
•
Press and hold
on the display begins to change and then
release the button to automatically search for
the next available station.
To store a station as a preset:
1. Tune to a frequency and then press
MEMORY/CLOCK.
2. Press PRESET UP or DN on the remote
control to select a preset channel number.
•
You can save up to 30 channels in FM band
and 10 channels in MW band.
3. Press MEMORY/CLOCK.
14
or
until the frequency
To listen to a preset station:
•
In Tuner mode, press PRESET UP or DN to
select a preset number, or press the number
buttons (0-9) for inputting the preset channel
number.
To turn on or off the stereo sound in FM
mode:
•
Press ST/MO on the remote control to turn
on or off the stereo sound.
Antenna
FM antenna
•
Pull out the telescopic atenna. Incline and turn
the antenna. Reduce its length if the signal is
too strong(very close to a transmitter).
AM antenna
•
The set is provided with a built-in antenna.
Direct this antenna by turning the whole set.
16
Need help?
Do you have a question about the CX77MP3C and is the answer not in the manual?
Questions and answers