Advertisement
CONNECTING YOUR DSR
Make sure that the satellite receiver is not plugged into a power source before you connect any cables
to the receiver. First connect the satellite input from your satellite dish to your receiver.
There are several options to connect your DSR, and not every DSR model, TV, or other component
includes all of the connection types described below. Review the appropriate manuals if necessary to
determine the best connection for your system.
Video: Use Composite video output (better), S-Video output (best for standard definition), Component
video, or DVI outputs (best for high definition) to connect the DSR directly to your television, VCR, and
home theater A/V receiver.
Channel 3/4 RF modulator output to TV: If your TV is equipped with only one signal input connection
(usually labeled Antenna/CATV input), connect the DSR's modulated RF output to TV input to receive
picture and sound with your TV tuned to either channel 3 or 4, depending on the channel 3/4 slide
switch setting on the back of your DSR.
Audio: The modulated RF output also provides audio along with video to televisions or VCRs (good).
Utilize the stereo audio output (better) or the coaxial or optical Digital audio outputs (best) to connect
the DSR directly to your television, VCR, and home theater A/V receiver.
10
Hide quick links:
Advertisement
