Maintenance - Elta BM122 Instruction Manual

BM122.qxp 9/10/07
GB
GB
• Changing the batteries:
If appears in the display or the display is dark, the batteries are dead. Replace the
batteries. Until they are replaced, no further blood pressure measurements are possible.
Change all batteries with battery type R6/LR6/AA.
Only use top quality identical batteries. Do not use new and expired batteries simultaneously. If
the batteries have leaked, remove them from the battery compartment using a cloth and
dispose them according to regulations. Wipe battery compartment and other compartments
carefully with a cloth. Be sure not to come in direct contact with the battery acid..
Batteries do not belong in your household waste.

MAINTENANCE

• To clean the casing, use a dry cloth moistened with water or a mild cleaning agent, and wipe
the unit using a dry cloth. If the sleeve is soiled and needs to be cleaned, use a dry or slightly
damp cloth only.
• Do not use any spray cleansers or strong cleaning agents.
• If the unit is not going to be used for an extended period of time, remove the batteries
(expired batteries can damage the unit).
STORAGE
• Always store the appliance in its tray after use.
• Protect the measuring unit and its accessories from direct sunlight, high temperatures,
humidity, and dust.
• Do not subject the unit to extremely low (below -20°C) or high (over 50 °C) temperatures.
• Do not fold the sleeve.
PREVENTION OF MALFUNCTIONING
• Do not twist the sleeve.
• Do not pump air into the sleeve unless it is wound around the arm.
• Do not try to disassemble the unit or to change the components of the appliance or sleeve.
• Do not drop the measuring unit or allow it to suffer any heavy impact.
2:24 PM Page 22
- 22 -