Attaching Other Displays - EUROCOM M400A COBRA User Manual

Attaching Other Displays

If you prefer to use a monitor or flat panel display, connect it to the
port on the left of the computer.
monitor
1. Attach your external monitor to the external monitor port (or TV to the S-
Video-Out Port), and turn it on.
2. Select the Displays tab in the ATI Mobility Radeon X700 properties.
3. Click the enable/disable button
use.
4. Click Apply.
5. Click Yes to accept the settings and OK to save the changes.
6. Select One display as Primary
Clone may operate in either Clone Mode, or Extended Desktop Mode).
/ for the display device you wish to
, the remaining as the Clone
ATI Video Driver Controls
external
Function Key
Combination
You can use the Fn +
F7 key combination to
toggle through the dis-
play options:
• Notebook Only
• External Display
Only
• Notebook + External
Display
Make sure you give the
displays enough time
to refresh.
Figure B - 3
Display Settings
(the
Attaching Other Displays B - 5
B