Table of Contents
Advertisement
System Requirements, Macintosh:
E
N
Minimum:
•
G3, G4
, iMac, iBook or Powerbook with native USB support
*
G
•
64 MB RAM
• CD-ROM drive
•
Mac OS version 9.2.2, MacOSX version 10.1.5 or MacOSX "Jaguar" version 10.2.6 or later
L
Recommended:
I
•
G3, G4
, iMac, iBook or Powerbook with native USB support
*
S
•
128 MB RAM
•
DVD-ROM drive
H
•
MacOSX "Jaguar" version 10.2.4 or later
* G3 and G4 accelerator cards not supported; AC-3 & DTS pass-throughsupported only with OS X 10.3 or higher
Transit USB Features
This diagram is an illustration of your Transit USB, with descriptions and information about
its physical features, which are described here.
1.
USB Connector – Connect the squared "device" end of the supplied USB cable here.
2.
Power LED – This LED lights bright blue when Transit USB receives power from your
computer's USB port.This will occur when Transit USB sees a valid USB connection to
your computer, and the computer is powered on and the USB port enabled.
4
3.
Optical/Analog Mic/Line Input Jack - This hybrid digital/analog jack accepts either analog
input via a standard 1/8" stereo mini plug, or optical S/PDIF digital input via an included
mini-optical adapter. The input jack automatically senses whether the input is analog or
digital.The analog input can also accept mic-level inputs, and provides plug-in power for
electret condenser microphones.
4.
Optical Digital-Output Connector - This is a standard optical S/PDIF connector for
digital audio (sometimes called a TOSLink connector) that accepts a standard optical
digital cable. This port can output either PCM stereo digital audio or digitally-encoded
AC-3 or DTS pass-through. The output comes with a plastic cover that should be
removed and stored for use when transporting the Transit USB.
5.
Line-Output Jack - This 1/8" mini-jack accepts a standard stereo plug, such as those used
for connection with portable audio devices and powered computer speakers. If you need
to connect the Transit to a home stereo system, you may obtain a cable or adapter with
a 1/8" stereo plug on one end and two male RCA plugs on the other. This output also
boasts an enhanced current drive for use with a pair of headphones.
Software Installation
Your Transit USB comes with driver software that allows it to communicate with your particular
computer (Mac or PC) and operating system.Please locate the section for your computer type and
operating system and follow the instructions for installing the driver software.
Your Transit USB comes with a standard USB cable. The squared end of the cable connects
to the Transit USB; the flat end connects to your computer's USB port. Do NOT connect the
Transit USB to your computer until instructed to do so.
Windows XP
1.
Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB
to your computer's USB port at this time. Browse the CD content and double click the
Transit USB folder.Then double click the Transit USB Icon.
5
E
N
G
L
I
S
H
Hide quick links:
Advertisement
Table of Contents
