Point Registration; What Is Point Registration - Eclipse AVN5500 User Manual

Point registration

1. What is point registration

Up to 106 geographical points - categorized as "home," memory points or special memory
points - can be stored on a map by registering them as memory points. There can be one
"home" and up to five special memory points. Registering detour memory points (maximum
of ten) also ensures that detours will be made through these points when route searches are
performed.
Memory points can be registered by selecting from 46 types of symbol and 4 types of symbol
with sound. It is possible to set a name, a name reading, and a telephone number for all
these types of symbol. (This does not apply to detour memory points.)
Registering memory points and special memory points enables you to retrieve them on a
map or when conducting a route search. Use these points effectively.
If you make a mistake in registration, correct it or delete the registration.
(If 106 memory points or 10 detour memory points have already been registered, delete
unnecessary points and reattempt the registration.)
Memory Points
Memory point
with voice alarm
Home
Special memory
points
Areas to avoid
The symbol allocated to a detour memory point cannot be changed.
100
The memory points (including your home and special memory points) can
be displayed and reordered according to registered type, symbol, or order
of registration, and the points can be selected from a list during point
searches and so on.
The following functions can be given to memory points with voice.
1
Setting to announce the approach to a point with sound
Bell, Chime, Music Box
2
Setting to announce the approach to a memory point from a
specified direction
Bell (With direction)
Only one registration can be made for your home, and you can search for a
route returning you home in a one-touch operation. Registering this point
first is recommended.
Up to 5 special memory points can be registered and allocated to touch
switches to facilitate a search for geographical points.
a destination, a route search can be initiated in a one-touch operation.
Up to 10 detour memory points can be registered with a name and detour
range settable for each point.
memory points.
You can also set names for detour
Also, when setting