Download Print this page

HP LaserJet Quick Reference Service Manual: Service Mode

Volume i.
Hide thumbs
Also See for LaserJet
User manual - 449 pages
Manual - 432 pages
Software manual - 418 pages

Advertisement

68 Error/Service
All Printers
The formatter PCA is defective.
A temporary error has occurred.
]Continue]
– Press
power cycle the printer.
6P, 5P
(68 SERVICE) -NVRAM full.
– Perform a nonvolatile random-access memory (NVRAM)
initialization by holding down
while turning on the printer.
5Si, 6P, 5P, 5
(68 Error) - error in NVRAM.
– Check the control panel settings. Replace the formatter PCA if
the problem persists.
5Si, 5
(68 SERVICE) -NVRAM full.
– Power cycle the printer. If the problem persists, perform a
NVRAM initialization by holding down
the LJ 5) while turning the printer on. All control panel settings
(including service mode settings) must be reset after this
procedure.
4P, 4 Plus, 4
(68 Error) There is an error in the NVRAM.
– Check the control panel settings. Replace the formatter PCA if
the problem persists.
64 – Control panel messages
and check the control menu settings. Then,
[Reset]
for more than 20 seconds
[Item]
[Job Cancel]
or
on
EN

Advertisement

   Related Manuals for HP LaserJet

Comments to this Manuals

Symbols: 0
Latest comments: