IIIP, IIP Plus, IIP
The toner cartridge is improperly seated.
The laser shutter operation is functioning improperly.
The fiber optic cable is damaged.
The laser PCA is bad.
IIID, III, IID, II
The toner cartridge is defective.
There is a bad cable in the laser scanner to the DC controller.
– Replace the cable in the laser scanner to the DC controller
The fiber optic cable has cuts or kinks.
The laser scanner assembly is defective.
The laser or laser power setting is defective.
The scanner is defective.
Laser subsystem problem.
If x=1: Beam detect malfunction.
If x=2: Laser malfunction.
Check the cable from the DC controller to the laser scanner.
Replace the laser scanner assembly.
Replace the DC Controller PCA.
46 – Control panel messages
to resume operation. If error persists: