11 Paper Out (MP/PC/UC/LC/EC/LE LOAD)
The paper tray is empty or is seated incorrectly.
The sensor arm is stuck or broken.
The tray-size sensing or configuration is defective.
– Verify the tray tabs and switches are at the right rear (or right
front) of the tray slot, or configure the tray from the control panel.
The paper control/sensor PCA is defective.
The paper cassette is empty or missing.
The paper cassette is seated incorrectly.
The paper out flag PS2 is broken or stuck.
The DC controller PCA is defective.
Tray 1 (the MP tray) is empty.
– Add paper to Tray 1; then press
Tray 2 (the paper cassette) is empty.
– Add paper to the tray if it is on continuously; verify that the
sensor flag movement is not hindered.
Error Codes – 23