Output Operation Condition x.yy
x=output device number
For the multibin mailbox:
01 = face-up tray not installed
See also the section on troubleshooting the 2,000-sheet input unit
and multibin mailbox/mailbox with stapler.
Remove Paper Jam
See 13 Paper Jam—all printers
The rear door is open.
The cassette paper out sensor flag is broken or missing.
The 500-sheet lower cassette is not properly adjusted (see service
– Adjust the tray, using the instructions in the service note.
Check the transfer roller to ensure that it is properly seated.
The input sensor (PS1) or fuser exit sensor (PS3) is bad; or with
jams from the MP tray (Tray 1), the paper end sensor (PS5) is bad.
Staple Limit Reached
Send print jobs of only 20 pages or fewer to the stapler.
20 – Control panel messages