Download Print this page

HP LaserJet 9000dn Service Manual: Carriage Assembly (stapler/stacker Only); Figure 141. Removing The Carriage Assembly (1 Of 2); Figure 142. Removing The Carriage Assembly (2 Of 2); Carriage Assembly (stapler/stacker Only)

Hide thumbs

Advertisement

Carriage assembly (stapler/stacker only)

1
Remove the face-up bin and the stapler/stacker bin (page 173).
2
Remove the back and front inner covers (page 174), the front cover (page 175), and the back
cover (page 176).
3
Remove the controller PCA cover (page 178).
4
Unplug the ribbon cable (callout 1) from the controller PCA by pressing the black tabs.
Figure 141.
Removing the carriage assembly (1 of 2)
5
Push the ribbon cable up through the hole.
6
Remove two TX-20 mount screws (callout 2).
7
Grasp the assembly on each side and lift up to clear the tabs.
8
Pull the assembly away from the product.
Figure 142.
Removing the carriage assembly (2 of 2)
C8519-90912
1 1
1 2
3000-sheet stapler/stacker and 3000-sheet stacker 185

Advertisement

Chapters

Troubleshooting

   Related Manuals for HP LaserJet 9000dn

   Related Content for HP LaserJet 9000dn

Comments to this Manuals

Symbols: 0
Latest comments: