Download Print this page

HP LaserJet 9000dn Service Manual: Figure 140. Removing The Accumulator Assembly (3 Of 3)

Hide thumbs

Advertisement

Hint
Removal of the carriage assembly is not required, but removing it makes removing and installing the
accumulator very easy. See "Carriage assembly (stapler/stacker only)" on page 185.
7
Remove four TX-20 mount screws (callout 3).
8
Grasp the assembly on each side and lift up to clear the tabs.
9
Pull the assembly away from the product.
Figure 140.
Removing the accumulator assembly (3 of 3)
To reinstall
Note
To prevent ribbon or staple cartridge damage, make sure you correctly install the accumulator ribbon
retention wire (callout 4).
184 Chapter 6 Removal and replacement
2
3
2
4
C8519-90912

Advertisement

Chapters

Troubleshooting

   Related Manuals for HP LaserJet 9000dn

Comments to this Manuals

Symbols: 0
Latest comments: