If the 3000-sheet stacker or 3000-sheet stapler/stacker is installed, move it away from the printer before
you begin repairs to the left side of the printer. See "Output accessory removal" on page 171.
Gain access to the following assemblies from the left side of the printer:
Lift the left door handle, and then open the left door.
Push the green tab (callout 1) downward. This releases the duplexer and moves it forward
Pull the center handle (callout 2), and slide the duplexer from the printer until it locks.
Removing the duplexer (1 of 2)
Grasp the two handles that are on the sides of the duplexer.
Lift the duplexer up (to release two underside catches) and remove it out of the printer.
Removing the duplexer (2 of 2)
146 Chapter 6 Removal and replacement