Download Print this page

HP LaserJet 9000dn Service Manual: Left Door And Diverter; Figure 58. Removing The Left Door

Hide thumbs

Advertisement

Left door and diverter

Note
If the 3000-sheet stacker or 3000-sheet stapler/stacker is installed, move it away from the printer to
gain access to the left door and diverter. See "Output accessory removal" on page 171.
1
Open the left door.
CAUTION
Make sure you do not drop the pins (callout 1) on the end of each spring-loaded rod.
2
Grasp the two spring-loaded rods (callout 2), push them in toward the printer, and then pull them
down and away from the printer.
3
Pull the left side of the door up and out of the left hinge (callout 3).
4
Slide the door toward the left and out of the right hinge (callout 4).
Figure 58.
Removing the left door
124 Chapter 6 Removal and replacement
C8519-90912

Advertisement

Table Of Contents

Troubleshooting

COMING SOON

   Related Manuals for HP LaserJet 9000dn

Comments to this Manuals

Symbols: 0
Latest comments: