How to operate the CD player
1. How to use the CD player
PWR
button
SOURCE MENU
button
Listening to a CD
Playback starts when a CD is inserted into the disc slot.
● The default setting for MUSIC JUKE in digital recording mode is AUTO. When a CD is
inserted into the disc slot, MUSIC JUKE automatically starts recording at the same time as
playback begins. Press
● "
REC" is displayed while recording is in progress. While waiting for recording to start
"
REC" changes to "
Press
SOURCE MENU
when a CD has been inserted.
Touch
CD
.
● Playback will begin.
●Titles and track names can be displayed when they are recorded on a CD. Up to
28 characters can be shown in the display.
●Only characters recorded by ASCII code can be shown on the CD-TEXT display.
●The CD-TEXT display may not be able to show characters for discs recorded
with many title characters.
●There may be occasions when CD-R/RW CD-TEXT cannot be displayed.
●Even if the title track is not contained on the music CD itself, the title will still be
displayed if the corresponding information is stored in MUSIC JUKE database. If
there is multiple data corresponding to a single track, the title is not displayed.
SOURCE MENU RECALL switch
REC
for at least one second to stop recording.
". See "Recording with MUSIC JUKE" (page 80).
or touch the SOURCE MENU RECALL switch
Track selection
(track start point)/
Fast-forward
(rewind)
button
FUNCTION switch
•RPT
•RAND
•SCAN
49