Setting DSP (acoustics)
The DSP function reproduces the sensation of various factory set performance environments
by adding reverberation to the music being played.
Touching the DSP touch switch
brings up the acoustics mode
screen as shown.
BACK
● Touch
The acoustics mode adjustments will
be saved and the system will return to
the previous operation screen.
Touch switch
CONCERT
LIVE
CATHEDRAL
The factory set DSP (acoustics) level for each mode can be adjusted to preference and saved.
Touch
or
screen while in the preferred
acoustics mode.
● There are five + and five - adjustment
levels available.
Touch the switch for the acoustics
mode that has been adjusted until
you hear a beep.
●When adjusting the level for the currently selected DSP (acoustics) mode, the
level will not be saved for other acoustics modes.
●You cannot set DSP (acoustics) at the same time as Circle Surround II.
DSP mode setting
after making settings.
DSP Environment
Concert hall
Live performance
arena
Church with echo
Adjusting, saving DSP (acoustics)
at the left of the
Touch switch
CLUB
Movie theater/theater
THEATER
OFF
DSP Environment
Disco/Club
DSP OFF
31