Change The Search Conditions For Each Interval - Eclipse AVN5435 Owner's Manual

• After having set the destination, the
following operations are enabled from
this screen:
Change the search conditions per
segment (Page 77)
Switch the order of destinations
(Page 78)
Delete a destination (Page 79)
Indicate a transit road (Page 80)
Cancel the transit road indication
(Page 81)
• When adding more destinations, touch
75 will appear. Repeat steps

Change the search conditions for each interval

The search conditions per segment can be changed and a search reinitiated.

Touch Search Condition
route modification screen.

Touch the search conditions (for
each route) per individual segment.

Touch OK .
• The route search is started.
For search condition characteristics, refer to "Reinitiating a route search" on
page 96.
Add
and the screen in step
3 6
to .
in the
3
on page
77