Eclipse AVN5495 Installation Manual page 13

System connection e
System connection e
•
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
•
The cables should be secured with tape or similar item so it will not cause an obstruction while driving.
If they get wound around components such as the steering wheel, shifting lever or brake pedal,
accidents may result.
Tip
• Install and connect all of the peripheral units before connecting them to the main unit.
• Do not remove the caps of RCA jacks unless in use.
• Be sure to wrap the connection cables with plastic tape to insulate them.
MAIN UNIT
1
16P
POWER CONNECTOR CABLE(Supplied with CD changer)
TO BATTERY+12V
(Permanent Supply)
BEC104
(sold separately)
4P
FRONT
SPEAKERS
REAR
SPEAKERS
TO GROUND
xample
xample
GPS ANTENNA
8
6P
1P
ANTENNA EXTENSION CABLE
4
Be sure to use when connecting the
radio antenna to the vehicle.
ANTENNA
PLUG
2 INTERCONNECTING
CABLE
(Power and speaker
connector)
CH3083
(sold separately)
TO GROUND
13P
2P
- 13 -
INTERCONNECTING CABLE
3
(Video input connector)
FROM EXTERNAL VIDEO EQUIPMENT
FRONT
REAR
NON FADER
(remove covers when using
external amplifier)
TO EXTERNAL MONITOR
13P
DIN CABLE
(Supplied with CD changer)