Cd/Dvd Unloading Steps - Eclipse AVN4430 Owner's Manual

Dvd-video/usb multi-source receiver/4.3 portable navigation/built-in bluetooth wireless technology
Hide thumbs Also See for AVN4430:
Table of Contents

Advertisement

● When you insert a CD into slot, its music
will be played or the MP3/WMA play will
start.
23

■ CD/DVD unloading steps

IMPORTANT
● When unloading a disc, use the following
notes.
Automatic transmission (AT) car:
If it is difficult to unload disc when the shift
lever is in P position, shift it to the N
position. (If your car has a column shift
lever, shift it to the P or N position.)
Manual transmission (MT) car:
If it is difficult to unload disc when the shift
lever is in "1", "3", "5" or "r" position, shift it
to the Neutral position.
● Take care NOT to close the display when
the ejected disc remains in the slot. If this
caution is not observed, this receiver or the
disc may be scratched.
● Do not push and close the display by hand,
or the display will be damaged.
● Wipe and clean the display immediately if
juice or another type of liquid spills onto it.
If it is not cleaned, the display may be
damaged.
● To protect the display from heat and dusts,
keep the display closed except when you
load or unload a disc.
● If the disc does not eject (for example, if it
is jammed), hold down the [
EJECT)] button for more than 5 seconds.
1
Press the [
(OPEN/EJECT)] button.
● This opens the display and ejects the disc.
After the disc has been ejected, press
2
the [
(OPEN/EJECT)] button.
(OPEN/
23

Advertisement

Table of Contents
loading

Table of Contents