Using Your Computer In Monitor Mode - Lenovo ThinkCentre M92z User Manual

1
Integrated microphones
2
Ambient light sensor
3
Integrated camera indicator
4
Integrated camera with block shield
5
Power switch
6
Hard disk drive activity indicator
7
On-Screen Display (OSD) menu
Enter
For more information about the front controls, see "Using your computer in monitor mode" on page 10.

Using your computer in monitor mode

Your computer can work in two modes: computer mode or monitor mode. This section provides instructions
on how to use your computer in monitor mode.
To use your computer in monitor mode, you need to have a second computer. Connect one end of the
DisplayPort cable to the DisplayPort-in connector on the rear of your computer, and the other end to the
DisplayPort connector on the second computer. Use the monitor/computer mode switch
your computer to switch your computer between computer mode and monitor mode.
The following table shows the functions of each control when your computer works in computer mode
or monitor mode.
Icon
10
ThinkCentre User Guide
Control
On-Screen Display (OSD) menu
Enter
Monitor/Computer mode switch
Right
Speaker mute/unmute control
(computer mode)
Left
Microphone mute/unmute control
(computer mode)
Exit
8
Monitor/Computer mode switch
Right
9
Speaker mute/unmute control (computer mode)
Left
10
Microphone mute/unmute control (computer mode)
Exit
Open the main OSD menu.
Confirm a selection.
Switch your computer between computer mode
and monitor mode.
Move to the right.
Turn on/off the internal speakers.
Move to the left.
Turn on/off the integrated microphones.
Exit the main OSD menu.
on the front of
Description