Download Print this page

Korg TR music workstation Operation Manual Page 15

Synthesizer manual.
Hide thumbs

Advertisement

(MAIN) L/MONO, R
These are unbalanced phone jacks (
These are the main audio output jacks. By setting "Bus
Select" to L/R, the output from an oscillator, an inser-
tion effect, an individual drum part, or the metronome
can be output to the (MAIN) L/MONO and R jacks.
When making connections in stereo, use L/MONO
and R. When making connections in mono, use the L/
MONO jack.
(INDIVIDUAL) 1, 2
These are unbalanced phone jacks (
These are individual (independent) audio output jacks.
By cycling the "Bus Select" through 1, 2, 1/2 an oscilla-
tor, an insertion effect, an individual drum part, or the
metronome etc. can be assigned to be output from the
(INDIVIDUAL) 1, 2 jacks. The output from the 1, 2
jacks is not affected by the [VOLUME] slider.
6. Pedal connections
ASSIGNABLE PEDAL jack
The separately sold Korg XVP-10 EXP/VOL pedal or
EXP-2 foot controller (options) can be connected to this
jack. (
p.13).
Its function can be assigned in Global mode, allowing
you to use the pedal to control the volume, etc.
(
p.117)
ASSIGNABLE SWITCH jack
A separately sold on/off foot switch such as the Korg
PS-1 foot switch can be connected here (
Its function can be assigned in Global mode, allowing
you to use the foot switch as a modulation controller,
to select programs or combinations, or to start/stop the
sequencer (
p.117).
DAMPER jack
A separately sold switch-type pedal such as the Korg
DS-1H damper pedal can be connected here.
If a DS-1H is connected, it will function as a half-
damper pedal. In order to ensure that the half-damper
pedal functions correctly, please adjust the polarity and
the sensitivity (
PG p.126, 128).
If any other switch-type pedal is connected, it will
function as a damper switch.
Set the polarity according to the pedal that you con-
nected. (
PG p.128)
7. MIDI
MIDI IN connector
Musical data and sound settings etc. are received at
this connector.
Use this to play TR from another connected MIDI
device (
PG p.233).
MIDI OUT connector
Musical data and sound settings etc. are transmitted
from this connector.
Use this to control another connected MIDI device
from TR (
PG p.233).
p.12).
MIDI THRU connector
Musical data and sound settings etc. that are received
at the MIDI IN connector are re-transmitted without
change from the MIDI THRU connector.
You can use this to connect multiple MIDI devices via
MIDI cables (
8. EXB-SMPL
p.12).
These connectors are used to sample mono or stereo
audio from a mic or audio device (
the internal effect processor to apply effects. (
The MIC/LINE level select switch ([MIC/LINE]
switch) and the level adjustment knob ([LEVEL] knob)
allow a wide range of audio sources to be input, from
mic level to line level.
SCSI connector
Use a SCSI cable to connect this to a SCSI-compatible
device (hard disk drive, CD-ROM drive, etc.). (
SMPL owner's manual)
AUDIO INPUT 1, 2 jacks
These are unbalanced phone audio input jacks. (
Connect them to the OUTPUT jack(s) of your external
audio device or mic.
[LEVEL] knob
p.13).
This knob adjusts the input level of the AUDIO INPUT
1, 2 jacks. (
[MIC/LINE] switch
This switch selects the input level of the AUDIO
INPUT 1, 2 jacks. (
If MIDI data is being transmitted from the TR via
USB to your computer, transmission from the
MIDI OUT connector is halted.
PG p.233).
(If the separately sold EXB-SMPL option is
installed)
p.35)
p.35)
p.35, 39), or to use
p.115)
EXB-
p.14)
9

Advertisement

   Related Manuals for Korg TR music workstation

Comments to this Manuals

Symbols: 0
Latest comments:
  • Robert Mar 09, 2018 09:55:
    Excellent manual, one of the best I've seen.
  • Jaime ernesto Ventura Marquina Jan 28, 2018 01:29:
    Manuel del Korg TR music workstatio​n para poder utilizarlo
  • Danilo Dec 30, 2014 04:01:
    Great! Gooooood help! veeeeeeeee​eery good!
  • ghazi Dec 22, 2014 07:01:
    good VERY GOOD VERY VERY GOOD..