Asko D5233 Use & Care Manual page 22

Setting a signal
If you want the machine to signal when the wash is complete, you can program it to do this.
The machine is set without a signal by default.
1.
2.
3.
PROG PROG
START
4.
STOP
or Reset
1.
2.
3.
PROG PROG
START
4.
STOP
22
Switch off the dishwasher at the main switch.
Hold in the Delayed start button at the same time as you press the
main switch. The button flashes. Release the button.
Press the Program button – when the Auto wash symbol lights, the
signal is activated.
Press the Start/Stop button and the setting will be stored until next time
you want to make a change.
Switch off the dishwasher with the main switch.
Hold in the Delayed start button at the same time as you press the
main switch. The button flashes. Release the button.
Press the Program button – when the Auto wash symbol goes out, the
signal is deactivated.
Press the Start/Stop button and the setting will be stored until next time
you want to make a change.
Customer Care Center
1-800-898-1879
www.askousa.com