Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha YZFR6W Owner's Manual

Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24202
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. Screw
2. Remove the socket (together with
the bulb) by pulling it out.
ECA11190
1. License plate light bulb
2. License plate light unit
EAU24310 3. Remove the defective bulb by pull-
4. Insert a new bulb into the socket.
5. Install the socket (together with the
6. Install the license plate light unit by
6-39
ing it out.
bulb) by pushing it in.
installing the screws.
6