Download Table of Contents Print this page

Advanced Programming Options - Sunbeam EM6910 Cafe Series Instruction Booklet

Cafe series
Hide thumbs Also See for EM6910 Cafe Series:
Table of Contents

Advertisement

Advanced programming options

Espresso Thermoblock Temperature
The water temperature of this espresso
machine has been calibrated to the precise
temperature of 92°C at the group head. The
temperature of the water at the group head
can be modified in increments of 2°C up and
down should it be desired.
To do this you need to follow the instructions
below:
1. I nsert the power cord into a 230-240V AC
power outlet and switch the power 'ON'.
Note: Although the espresso machine is ON
at the power outlet ensure that the actual
espresso machine power is 'OFF'. Therefore
no lights will be illuminated on the espresso
machine control panel.
2. P ress and hold down the ' single
espresso' button.
3. W hile still holding down the ' single
espresso' button briefly press the 'POWER'
button and release.
Note: This activates the programmability of
the Espresso Thermoblock Temperature and
to signal this, the light above the ' single
espresso' button will illuminate, which is the
factory setting.
-4°C
-2°C
4. R elease the ' single espresso' button.
34
Factory
+2°C
+4°C
Setting
Note: The light above the ' single espresso'
button will remain on and then if you have
already re-programmed the temperature of
the espresso thermoblock the position of the
light will move to one of the other 4 settings
indicating the current temperature setting.
Note: This light will remain on for up to 5
seconds before automatically returning to
the Factory Setting if no action is taken. The
espresso machine will then power on and
begin heating up.
5. W ithin 5 seconds press and release one
of the buttons below depending on the
required temperature adjustment;
+2°C = Press the '
+4°C = Press the 'PROGRAM' button
-2°C = Press the 'MANUAL' button
-4°C = Press the 'POWER' button
Note: When you have selected a new
temperature setting the light above the
button pressed will illuminate and to indicate
that the setting has been changed correctly
the light will flash and 2 beeps will sound.
Note: The espresso machine will then
automatically power on and begin heating up.
Remember: If you do not select a new
temperature setting within 5 seconds the
program will return to the Factory Setting and
the espresso machine will then power on and
begin heating up.
double cup' button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents