Using Your Quantum Smartbake - Sunbeam BM7800 Quantum SmartBake Instruction Booklet

Using your Quantum SmartBake

Before using your Quantum SmartBake
for the first time
We recommend that you remove the baking
pan (instructions to do so are explained
below) and wipe over the bread pan and
kneading blade with a damp cloth and dry
thoroughly.
Do not immerse the bread pan in water
unless necessary. Do not use harsh abrasive
cleaners as they may damage the non-stick
surface. Do not place any parts of your
breadmaker in the dishwasher.
Removing the baking pan
Open the lid of your Quantum SmartBake
and remove the baking pan by taking hold of
the baking pan handle and lifting it straight
up.
It is a good idea to remove the baking
pan before adding ingredients so that no
ingredients are spilt into the baking chamber
and onto the element.
14
Adding Ingredients
We recommend that you add the ingredients
into the bread pan in the order listed. All
ingredients should be at room temperature
and measured carefully.
Replacing the baking pan
To return the baking pan to the baking
chamber simply position the baking pan into
the baking chamber and push down until it
slots into position.
Lay the handle flat toward the side of the bread
pan.
Close the lid securely, plug the machine into
a 230-240 volt AC power outlet and turn
the power ON.
Note: When the machine is first plugged in,
the LCD window will beep and flash "0.00"
until a program is selected.
®