Page 1
LC-32LE600E LC-32LE600S LC-40LE600E LC-40LE600S LC-46LE600E LC-46LE600S LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT TÉLÉVISEUR COULEUR À ÉCRAN OPERATION MANUAL CRISTAUX LIQUIDES (LCD) BEDIENUNGSANLEITUNG TELEVISORE A COLORI LCD MODE D’EMPLOI LCD-KLEURENTELEVISIE MANUALE DI ISTRUZIONI TELEVISIÓN EN COLOR LCD GEBRUIKSAANWIJZING TELEVISOR DE CRISTAL LÍQUIDO MANUAL DE MANEJO MANUAL DE OPERAÇÃO...
Page 2
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
(MPEG4 H.264, MPEG4 AVC, MPEG4 AVC/H.264) compressed broadcasts. Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product.
Introduction Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV.
Introduction Remote control unit B (Standby/On) Exit the “MENU” screen. (Page 10) R/G/Y/B (Colour) buttons Buttons for useful operations The coloured buttons are m (Teletext) correspondingly used to select the ATV: Display analogue teletext coloured items on the screen (e.g., (Page 12).
Preparation Supplied accessories Remote control unit ( x 1) AC cord ( x 1) Cable clamp ( x 1) Stand unit ( x 1) For 32 inch models For 40/46 inch models Product shape varies in some countries. Pages 3 and 6 Page 8 Page 8 Page 5...
Preparation Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. Open the battery cover.
Quick guide Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Run the Preparation initial Watch TV settings ...
• This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 30). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Quick guide Starting channel search. Initial auto installation Start When the TV is powered on for the first time after Skip purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one Press a/b to select “Start” or “Skip”, and then after another.
Watching TV Daily operation Changing channels With :r/s: With 0_9: Switching on/off Turning on/off the power Turn on (;) the MAIN POWER switch on the Selecting an external video left side of the TV (Page 4). source Press a on the TV. Switch it off by pressing a on the TV.
Watching TV EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO, view detailed information about them, tune to an event currently on-air. Basic Operation The illustrations on this page are explained [DTV-TV] [Mon] [Mon]...
Watching TV Buttons for teletext operations Teletext Buttons Description What is Teletext? :r/s Increase or decrease the page number. Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives Select a group or block of pages displayed teletext signals broadcast by a TV network, and decodes in the coloured brackets at the bottom of Colour (R/G/...
Connecting external devices Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
Connecting external devices Component connection SCART connection Example of connectable devices Example of connectable devices Decoder DVD player/recorder EXT 1 (RGB) terminal You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when connecting a DVD player/recorder or other device. AUDIO COMPONENT ...
Connecting external devices Audio connections Speaker/amplifier connection Connect an amplifier with external speakers as shown below. Connecting an amplifier with digital Connecting an amplifier with audio input analogue audio input DIGITAL AUDIO IN AUX1 IN AUX OUT Optical audio cable Audio cable After connecting Digital audio output setting...
Menu operation What is the MENU? • You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”. • The “MENU” enables various settings and adjustments. Basic Operation Display the MENU Select an item Screen Press a/b/c/d to select/adjust...
Basic adjustment Audio Settings Range of OPC The brightness level range of the OPC sensor’s automatic Audio adjustments can be set according to your preferences. DYNAMIC The adjustment range of the OPC sensor can be set to a maximum of e 16 and a minimum of f 16. Treble Bass NOTE...
Basic adjustment Audio Outputting audio only Audio Description Option Available only when you set “Audio Description” in the Audio Only “Type” menu above. Item When listening to music from a music programme, you can set the TV off and enjoy audio only. When set to “On”, audio for the visually Speaker impaired is output from the TV speakers.
Basic adjustment Power Save Settings No Signal Off ECO picture control [On] When set to “Enable”, the TV will automatically enter Energy Save [Standard] standby mode if there is no signal input for 15 minutes. No Signal Off [Disable] No Operation Off [Disable] No Operation Off The TV will automatically enter standby mode if no...
Page 23
Basic adjustment Additional Search Channel Skip Channels with a ✔ mark are passed over when pressing Use this menu to add new channels automatically after :r/s on the TV or remote control unit. auto installation has been completed. Press a/b to select the desired channel. Press ;...
Basic adjustment Password/Parental lock settings Digital Setup Subtitle Setup Set up to two preferred subtitle languages (including Child Lock subtitles for the hearing impaired) to display if subtitles are available. Allows you to use a PIN to protect certain settings from being accidentally changed.
Useful viewing functions Press f. Selecting the picture size • The “WIDE MODE” menu displays. • The menu lists the “WIDE MODE” options selectable for You can select the picture size. Selectable picture size the type of video signal currently received. varies with the type of signal received.
Other useful features Setting when using external Reset devices Setup Input source settings Reset Setup If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings Input Label to the factory preset values. Go to “MENU”...
Connecting a PC Connecting a PC Adjusting the PC image automatically HDMI Connection This function enables the screen to be automatically adjusted to its best possible condition when the analogue HDMI 1, 2 or 3 terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc.
Connecting a PC Parameter RS-232C port specifications Input the parameter values, aligning left, and fill with blank(s) for the remainder (Be sure that four values are PC Control of the TV input for the parameter). • When a programme is set, the TV can be controlled When the input parameter is not within an adjustable from the PC using the RS-232C terminal.
Connecting a PC PC compatibility chart Horizontal Vertical Analogue (D- Resolution Digital (HDMI) VESA Standard Frequency Frequency Sub) ✔ ✔ ✔ 640 x 480 31.5 kHz 60 Hz ✔ ✔ ✔ SVGA 800 x 600 37.9 kHz 60 Hz ✔ ✔...
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Appendix Optional accessory The listed optional accessory is available for this LCD colour TV. Please purchase them at your nearest shop. • Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.
If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg SHARP CORPORATION http://www.sharp-eu.com Printed in Poland Gedruckt in Polen Imprimé en Pologne Stampato in Polonia Gedrukt in Polen Impreso en Polonia Impresso na Polónia TINS-E285WJZZ 09P07-PL-NG...