Select And Start A Washing Programme; Setting And Starting The Programme Delay Start; Interrupt A Washing Programme In Progress - Electrolux ESL 66010 User Manual

1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Press the On/Off button. The
dishwasher must be in setting
mode.
4. Press the button corresponding to
the required programme (see
'Washing programmes' chart).
Close the dishwasher door, the
programme starts automatically.
1. After having selected the washing
programme, press the delay start
button until the flashing number of
hours for the delay start will
appear in the digital display. The
commencement of the selected
washing programme can be
delayed from 1 to 19 hours.
2. Close the dishwasher door, the
countdown starts automatically.
3. The countdown will decrease with
steps of 1 hour.
4. The opening of the door will
interrupt the countdown. Close the
door; the countdown will continue
from the point at which it was
interrupted.
5. Once the delay start has elapsed
the programme will start
automatically.
Once the washing programme has
started, a point-shaped optical signal
appears on the floor beneath the
dishwasher's door.
This optical signal will remain
illuminated for all the duration of the
washing programme.
If the appliance has been installed
higher up with a furniture door
mounted flush, the optical signal will
be no longer visible.
Open the dishwasher door; the
programme will stop. Close the
door; the programme will start from
the point at which it was
interrupted.
electrolux