Table of Contents
Advertisement
NOTES:
•
If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
•
If a station being viewed stops
broadcasting, the TV will
automatically shut itself off after 15
minutes.
•
It may take a few seconds for a
digital channel picture to appear on
screen after being selected.
1
To turn on the TV, press POWER.
2
Adjust the volume level by
pressing VOL + or – . The volume
level will be indicated on the
screen by white bars. As the
volume level increases, so do the
number of bars. If the volume
decreases, the number of white
bars also decreases.
3
Set the TV/CABLE menu
option to the appropriate
position (see page 23).
4
Press the Direct Channel
Selection buttons to select the
channel.
TO SELECT ANALOG CHANNELS
1-9:
Press 0 twice, then 1-9 as
needed. Example, to select channel 2, press 0, 0, 2.
10-99:
Press 0, then the remaining 2 digits. Example, to
select channel 12, press 0, 1, 2.
100-125: Press the 3 digits in order. Example, to select
channel 120, press 1, 2, 0.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press –, followed by the remaining
3 digits.
Example, to select channel 015-001, press 0, 1, 5, –, 0, 0, 1.
• If a channel is selected with only audio content, "AUDIO
ONLY" will be displayed on the screen.
• If a channel is selected with a weak digital signal, "DIGITAL
CHANNEL SIGNAL STRENGTH IS LOW" will be displayed
on the screen.
• If a channel is selected to which you have not subscribed,
"DIGITAL CHANNEL IS SCRAMBLED" will be displayed on
the screen.
VHF/UHF/CABLE CHANNELS
TV
VHF
2-13
UHF
14-69
TV operation
V O L U M E
TV - VHF/UHF channels
CABLE - CABLE TV channels
CABLE
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125 (100) (125)
01
(5A)
2 5
A N T
A B C D
C A B L E
1 2
25
Advertisement
Table of Contents
