Controlling Cd Changer (Optional); Multi-Changer Selection - Alpine CVA-1006 Owner's Manual

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be
connected to the IVA-C801/CVA-1006 if it is Ai-
NET compatible. With a CD Changer connected to
the Ai-NET input of the IVA-C801/CVA-1006, the
CD Changer will be controllable from the IVA-
C801/CVA-1006.
Using the KCA-400C (the Multi-Changer
Switching device) multiple changers can be
controlled by the IVA-C801/CVA-1006.
See the Multi-Changer Selection section on this
page for selecting the CD Changers.
∗ You can directly select the CD changer mode by
pressing the CHG (IVA-C801) or CHANGER (CVA-
1006) button.
1
Press the SOURCE button to display the main
menu.
2
Rotate the rotary encoder to select "CD CHG,"
then press the rotary encoder.
The display changes to the CD changer mode
screen.
3
When a 6-Disc CD Changer is connected.
Press the FUNC (PAGE 1/2) button. The
Function Guide display changes.
Press the Function buttons to select your desired
disc loaded. The Function buttons 1 (DISC1)
through 6 (DISC6) select the discs from the first
disc to 6th disc. For example, press the 3 (DISC
3) button to select the third disc.
NOTE
To select your desired track number on the selected disc,
lightly press the 1 (g) or 3 (f) repeatedly until
your desired track number is displayed.
When a 12-Disc CD Changer is connected.
You can select the disc numbers 1 to 6 in the
same manner as for 6-disc Changer.
Press the FUNC (PAGE 1/3) button twice to
select the disc numbers 7 to 12. The Function
Guide display changes and now the Function
buttons 1-6 represent disc numbers 7-12.
Press the Function buttons (1 through 6) to
select your desired disc. For example, to select
9th disc, press 3 (DISC 9) button.
NOTES
• To select your desired track number on the selected
disc, lightly press the 1 (g) or 3 (f)
repeatedly until your desired track number is
displayed.
• After selecting the desired, you can operate in the
same way as for the CD player. For details please see
the CD player operation section
• * If both the CD Changer and DVD Changer are
connected, each pressing of the CHG (CHANGER)
button changes between the CD Changer mode and
the DVD Changer mode.

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers,
the KCA-400C (Multi-Changer Switching device)
must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2
Switching devices, you can connect up to 6 CD
Changers.
1
Press the SOURCE button to display the main
menu.
2
Rotate the rotary encoder to select changer 1-4
(when one KCA-400C is connected) or changer
1-6 (when two KCA-400Cs are connected). Then
press the rotary encoder.
The display shows the selected CD changer
mode screen.
NOTE
When one KCA-400C is connected to the changer,
"Changer 1-4" is displayed in the main menu. When two
KCA-400Cs are connected to the changer, "Changer 1-6"
is displayed in the main menu.
3
In Changer mode, you can select the next
changer (connected changers only) by pressing
the BAND button on the unit or on the remote.
NOTE
You cannot operate this function in the title display or
Title inputting display.
4
To operate the selected changer, see "CD Player
Operation" section.
17
-EN