Manual Storing Of Station Presets; Automatic Memory Of Station Presets - Alpine CVA-1006 Owner's Manual

Radio Operation
(IVA-C801)
Function buttons
(1 through 6)
1

Manual Storing of Station Presets

1
Tune in a desired radio station you wish to store
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
2
Press and hold any one of the Function buttons
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds. The Function Guide indicators in the
display, P.SET1 through P.SET6, will blink for 5
seconds.
3
While the P.SET1 through P.SET6 indicators in
the display are blinking, press the Function
button into which you wish to store the station
(within 5 seconds). The indicators in the display
stop blinking, showing that the station has been
memorized at the Preset button pressed.
4
Repeat the above procedure (1 to 3) to store up
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM or D.A.P.).
NOTE
If a preset memory has already been set in the same
Function button, it will be cleared and the new station
will be memorized.
12
-EN
3 4 5 6
Rotary encoder
BAND LIST
(CVA-1006)
Function buttons
(1 through 6)
1
FUNC
BAND
Automatic Memory of Station
Presets
The tuner can automatically seek and store 6
strong stations in the selected band in order of
signal strength.
1
Press the BAND button in the radio mode to
select the desired radio band.
2
Press the 6 (A.MEMO) button.
The tuner automatically seeks and stores 6
strong stations into the 1 (P.SET1) to 6
(P.SET6) buttons in order of signal strength.
When the automatic storing has been
completed, the tuner goes to the station stored in
the 1 (P.SET1) button.
NOTES
• If no stations are stored, the tuner will return to the
original station you were listening to before the
automatic storing procedure began.
• The radio station names (titles) may be erased when
Automatic Memory of Station Presets function is
performed.
3 4 5 6
Rotary encoder
LIST
FUNC