Download  Print this page

Brother NV10 Operation Manual Page 46

Computerized sewing machine.
Hide thumbs

Advertisement

c
After sewing 3 to 5 stitches, press
(reverse/reinforcement stitch button).
Keep
(reverse/reinforcement stitch button)
held down until you reach the beginning of the
stitching.
a Reverse/reinforcement stitch button
While
(reverse/reinforcement stitch button)
is held down, reverse stitches are sewn.
d
After sewing back to the beginning of the
stitching, release
stitch button).
The machine stops sewing.
e
Press
(start/stop button), or press down on
the foot controller.
The machine starts sewing in the
normal sewing direction.
f
When the end of the stitching is reached,
press
(reverse/reinforcement stitch
button).
Keep
(reverse/reinforcement stitch button)
held down until 3 to 5 reverse stitches are
sewn.
While
(reverse/reinforcement stitch
button) is held down, reverse stitches
are sewn.
(reverse/reinforcement
g
After 3 to 5 reverse stitches have been sewn,
release
(reverse/reinforcement stitch
button).
The machine stops sewing.
Press
(start/stop button), or press down on
h
the foot controller.
At this time, if
(start/stop button) is held
down, the machine sews at a slow speed.
The machine starts sewing in the
normal sewing direction.
After sewing to the end of the stitching, stop
i
the sewing machine.
Press
(start/stop button) or release foot
controller.
3
4
a Beginning of stitching
b End of stitching
■ Sewing reinforcement stitches
When sewing stitches other than straight or zigzag
stitches that are secured with reverse stitching,
pressing
(reverse/reinforcement stitch button)
sews reinforcement stitches, 3 to 5 stitches on top
of each other.
a
a Reverse stitching
b Reinforcement stitching
Memo
● Whether reverse stitches or reinforcement
stitches are sewn depends on the stitch that
is selected. For details, refer to "Stitch
Settings" (page 79).
1
1
2
5
6
2
b
45
2

Advertisement

Table of Contents

   Also See for Brother NV10

   Related Manuals for Brother NV10

This manual is also suitable for:

Innov-is 10a885-v11

Comments to this Manuals

Symbols: 0
Latest comments: