Download  Print this page

Using The Optional Walking Foot - Brother NV10 Operation Manual

Computerized sewing machine.
Hide thumbs

Advertisement

■ Attaching the presser foot holder
a
Align the presser foot holder with the presser
bar.
a
b
a Presser bar
b Presser foot holder
b
Hold up the presser foot holder with your
right hand, and tighten the screw.
With your left hand, turn the screwdriver
clockwise.
Note
● If the presser foot holder is not correctly
installed, the thread tension will be
incorrect.
CAUTION
● Be sure to securely tighten the presser foot
holder screw, otherwise the presser foot
holder may fall off and the needle may strike
it, causing the needle to bend or break.
Using the optional walking
foot
With the optional walking foot, both pieces of fabric
are fed evenly by the feed dogs and the teeth on the
presser foot. This is useful when sewing fabrics that
are hard to feed such as vinyl and leather and when
sewing fabrics that easily slip such as velvets or
when quilting.
Use the screwdriver to attach the walking foot.
■ Attaching the walking foot
a
Remove the presser foot holder.
• For details, refer to "Removing the presser
foot holder" (page 32).
b
Hook the connecting fork of the walking foot
onto the needle clamp screw.
a Connecting fork
b Needle clamp screw
a
b
33
1

Advertisement

Table of Contents

   Also See for Brother NV10

   Related Manuals for Brother NV10

This manual is also suitable for:

Innov-is 10a885-v11

Comments to this Manuals

Symbols: 0
Latest comments: