Download  Print this page

Replacing The Presser Foot; Presser Foot Precautions - Brother NV10 Operation Manual

Computerized sewing machine.
Hide thumbs

Advertisement

Replacing the Presser Foot

Presser foot precautions

Be sure to observe the following precautions concerning the presser feet.
CAUTION
● Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit
the presser foot, causing the needle to bend or break.
● Only use presser feet designed specifically for this sewing machine. Use of any other presser foot may
result in injuries or damage to the machine.
Replacing the presser foot
Replace the presser foot as described below.
a
Press
(needle position button) once or
twice to raise the needle.
a Needle position button
b
Turn off the sewing machine.
CAUTION
● Before replacing the presser foot, be sure to
turn off the sewing machine, otherwise injuries
may occur if the start/stop button is
accidentally pressed and the machine starts
sewing.
● Make sure that the presser foot is installed in
the correct direction, otherwise the needle
may strike the presser foot, causing it to break
and cause injuries.
c
Raise the presser foot lever.
a Presser foot lever
d
Press the black button at the back of the
presser foot holder to remove the presser foot.
a
b
a Black button
b Presser foot holder
a
31
1

Advertisement

Table of Contents

   Also See for Brother NV10

   Related Manuals for Brother NV10

This manual is also suitable for:

Innov-is 10a885-v11

Comments to this Manuals

Symbols: 0
Latest comments: