Download  Print this page

Checking The Needle; Replacing The Needle - Brother NV10 Operation Manual

Computerized sewing machine.
Hide thumbs

Advertisement

Checking the needle

Sewing with a bent needle is extremely dangerous
since the needle may break while the machine is
being operated.
Before using the needle, place the flat side of the
needle on a flat surface and check that the distance
between the needle and the flat surface is even.
b
a Flat side
b Needle type marking
a Flat surface
If the distance between the needle and the flat
surface is not even, the needle is bent. Do not use
a bent needle.
a Flat surface
a
a
a

Replacing the needle

Replace the needle as described below. Use the
screwdriver and a correct needle, as described in
"Checking the needle".
a
Press
(needle position button) once or
twice to raise the needle.
a Needle position button
b
Turn off the sewing machine.
CAUTION
● Before replacing the needle, be sure to turn
off the sewing machine, otherwise injuries
may occur if the start/stop button is
accidentally pressed and the machine starts
sewing.
c
Lower the presser foot lever.
a
a Presser foot lever
CAUTION
● Before replacing the needle, place fabric or
paper under the presser foot to prevent the
needle from falling into the hole in the needle
plate.
1
29

Advertisement

Table of Contents

   Also See for Brother NV10

   Related Manuals for Brother NV10

This manual is also suitable for:

Innov-is 10a885-v11

Comments to this Manuals

Symbols: 0
Latest comments: