Slide the thread into the thread take-up lever
from the right to the left.
a Thread take-up lever
● If the needle is not raised, the thread take-
up lever cannot be threaded. Be sure to
press the needle position button to raise the
needle before threading the thread take-up
Pass the thread behind the needle bar thread
The thread can easily be passed behind the
needle bar thread guide by holding the thread
in your left hand, and pulling the thread into
the guide from right to left.
a Needle bar thread guide
Lower the presser foot lever.
a Presser foot lever
While lowering the needle threader lever,
hook the thread onto the guide.
a Needle threader
Catch the thread on the hook as shown below.
a Needle threader lever
Raise the needle threader lever, and then pull
the end of the thread which passed through
the eye of the needle.
● Be careful not to pull on the thread with force
or it may bend the needle.