Selecting An Access Point - Casio PV-750 Plus E-Mail Manual

Selecting an Access Point

You can select an access point on the screen that appears when you first
enter the Mail Mode or while the Inbox or Outbox tab is on the display.
Important!
• If you have multiple access points set up on your PV Unit, be sure to
select the access point you want to use before starting to write, send, or
receive messages.
• The Inbox and Outbox show the messages for the currently selected
access point only.
To select an access point on the initial Mail Mode screen
1. On the initial screen that appears when your first enter the Mail Mode,
tap the L arrow next to the access point box.
• This displays a list of all the access points you currently have configured
on your PV Unit (page 94).
2. Tap the name of the access point you want to select.
To select an access point on the Inbox or Outbox tab
1. On the Inbox or Outbox tab, tap the L arrow next to the access point
box.
2. Tap the name of the access point you want to select.
• The contents of the Inbox and Outbox change to the messages for the
access point you select.
100
Access point