5.
Install receipt/journal paper.
Loading journal paper
The same type of paper (45 mm
operating the cash register or when red paper appears from the printer.
CAL X
REG
Z
OFF
RF
PGM
PCR-1000 User's Manual
83 mm i.d.) is used for receipts and journal. Load the new paper before first
1 1 1 1 1
Use a mode key to set the
mode switch to REG
position.
2 2 2 2 2
Open the printer cover.
3 3 3 3 3
Cut off the leading end of
the paper so it is even.
4 4 4 4 4
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
5 5 5 5 5
Drop the paper roll gently
and insert paper to the
paper inlet.
6 6 6 6 6
Press the j key until
about 20 cm to 30 cm of
paper is fed from the
printer.
7 7 7 7 7
Slide the leading end of the
paper into the groove on
the spindle of the take-up
reel and wind it onto the
reel two or three turns.
9