Screen Send Function - Casio fx-9750G Manual

20-6 Screen Send Function

The following procedure sends a bit mapped screen shot of the display to a con-
nected computer.
u u u u u To send the screen
P.365 1. Connect the unit to a personal computer or to a CASIO Label Printer.
P.366 2. In the data communication main menu, press 6 (IMGE), and then select "On"
3. Display the screen you want to send.
4. Set up the personal computer or Label Printer to receive data. When the other
You cannot send the following types of screens to a computer.
for Image Set.
6(IMGE)
1(OFF) ........ Graphic images not sent
2(ON) .......... Bit map
unit is ready to receive, press M to start the send operation.
• The screen that appears while a data communication operation is in progress.
• A screen that appears while a calculation is in progress.
• The screen that appears following the reset operation.
• The low battery message.
• The flashing cursor is not included in the screen image that is sent from the
unit.
• If you send a screen shot of any of the screens that appear during the data
send operation, you will not be able to then use the sent screen to proceed with
the data send operation. You must exit the data send operation that produced
the screen you sent and restart the send operation before you can send addi-
tional data.
• You cannot use 6mm wide tape to print a screen shot of a graph.
1 2 3 4 5 6
372